One System Fits All

I’ve said it before, and I’ll repeat myself here: sharpening woodworking edge tools is and always will be an abrasive issue. I have used every type of stone and grinder through my 60 years of woodworking. The choice of abrasives may well be a matter of preference, which one you choose depends on how much...

Source

from Paul Sellers' Blog https://ift.tt/znjeZYH
via IFTTT

My World of Wood

There’s no cute titling in my world. As a working lad, working with other men, there was no space for image and pretence. You just made. I’m glad for that now. They didn’t take any truck from young bucks but gave everything they knew to those who were well-mannered and respectful. These men polished their...

Source

from Paul Sellers' Blog https://ift.tt/GaS5q8U
via IFTTT

DIY Floating Frames that Anyone Can Make!

Don’t miss the pre-order pricing for Caleb James’ Dry Bar Cube!

Canvas prints always look better in a floating frame. Many frames are commercially available but most will be cheaply made and won’t be a perfect fit for your artwork. Fortunately, making your own DIY floating frame is easy and inexpensive. All you need is a table saw, miter saw, and drill. For the wood, head to the “project boards” section of your local hardware store.

• • Material for each frame (assuming a 16×16 print): (4) 1/2” x 2 1/2” x 2’ (Sold as 1/2” x 3” x 2’) (4) 1/4” x 1 1/2” x 2’ (Sold as 1/4” x 2” x 2’)
  • Merle Clamp (Amazon Affiliate Link)
  • To finish the frame I used Krylon Fusion Satin. (Amazon Affiliate Link)
  • The frame is hung using a sawtooth hanger. (Amazon Affiliate Link)
  • Titebond Speed Set Wood Glue (Amazon Affiliate Link)

The post DIY Floating Frames that Anyone Can Make! appeared first on The Wood Whisperer.

from The Wood Whisperer https://ift.tt/4zvKT1R
via IFTTT

Low-cost, Long-lasting Sharpening Kit

For sharpening all chisels, planes, spokeshaves and knife types, in fact, anything with a cutting edge, diamond plates do it all, they cut steel very fast, stay flat, and they are cleaner than oilstones, natural stones, water stones, man made or naturally occurring all of which need additional paraphernalia with little good reason or advantage....

Source

from Paul Sellers' Blog https://ift.tt/mZpoCx9
via IFTTT

Auguring Well With Augers

We tend to do better amassing tools without paying a premium price when we wait with a patient and watchful eye and are prepared to wait even a year or two to get the tool we want. Apart from starting out as an apprentice, where necessity forced me to buy tools according to need and...

Source

from Paul Sellers' Blog https://ift.tt/pgG1xf2
via IFTTT

Narrowing the Chisel Options

A workhorse and a one-type-suits-all to get you in the saddle. Believe me, they work! For some time, probably sixty years now, I have reflected on chisels, types and functions. General chisel work comprises two tasks that in no way are the same and therefore often set the tone for some discussion with those starting...

Source

from Paul Sellers' Blog https://ift.tt/Iu02GMa
via IFTTT

Loose Chisel Handle Repair

Some modern makers use a tang that’s forged to make a super strong tang, but it is not the traditional hammer-forged on the anvil type that’s tapered from the bolster to a more refined and consistent taper finishing at a steep, sharp point. I have one of my German-made 6mm chisels that started to squeak...

Source

from Paul Sellers' Blog https://ift.tt/9BH6c0S
via IFTTT