Thinking Glue and Gluing Up

Is watching glue dry the same as watching and waiting for paint to dry; both have a way of postponing progress, when both, in their own way, are actually the progressing action of moving things forward. The inference in the common saying, “It’s like watching paint dry.” is, of course, that waiting for something you...

Source

from Paul Sellers' Blog https://ift.tt/jy8CWBg
via IFTTT

Making Finishing Easy, Micro-Adjustment for any Fence, Table Saw Calibrator | Tools Unleashed 03

Welcome to another Tool Unleashed, where I provide first impressions and mini tool reviews for your enjoyment. UNLEASH THE TOOLS!

• Makrs Stain Pads (affiliate link) Use Code TWW for 15% OFF!
• Simple Varnish Finish Video
• Canyon Fire Tools MicroMag Adjuster
• MicroJig Magnet that works with the Canyon Fire Adjuster
• Stupid Simple Tools Saw Calibrator  (Affiliate Link)
• A-LINE-IT Calibration Tool

Makrs Stain Pads (Sent to me for free. Affiliate Link)

When these stain pads showed up at the shop I kind of dismissed them. I don’t stain very often so I didn’t think I would use them. Oddly enough, I ended up with a large staining project and finally had a chance to use them. I was very impressed with how well they laid down stain that I decided to see how they would work using clear finish and was very impressed with the results. The microfiber outer layer leaves an incredibly smooth finish and the foam interior drinks up a ton of liquid. That means each dip into the finish lasts longer and goes further. I liked the product so much that I approached them about working together and we now have a coupon code that will save you 15% on your purchase. Use code TWW at checkout.

Canyon Fire Tools MicroMag Adjuster (Sent to me for free, but no affiliate link)

This is a micro-adjuster that can be added to pretty much any fence, table saw or otherwise. A large rare earth magnet holds the unit to the fence while a larger Magswitch magnet tuns on and off as needed for use. With the fence unlocked and the Magswitch magnet engaged, you can rotate the thumb wheel 5/8” in each direction for a total of 1 1/4” of micro-adjustment. So if you’re really sneaking up on a measurement, no more tap tap tap business. You can simply make your test cut, unlock the fence and then use the adjuster to push or pull the fence as needed. Most importantly, this thing doesn’t get in my way and stays on the saw permanently.  It’s not cheap, but it is made in the USA by a small maker.

Stupid Simple Tools Saw Calibrator (Sent to me for free. Affiliate link)

The saw calibrator is a pretty straightforward. It drops right into your miter slot for checking the alignment of your blade and fence with the miter slot. I used the tool to recalibrate my saw and it worked like a charm. While I do enjoy the aesthetics and functionality, I do have to mention that there are other comparably-priced solutions on the market that do more, such as the A-LINE-IT Calibration Tool.

The post Making Finishing Easy, Micro-Adjustment for any Fence, Table Saw Calibrator | Tools Unleashed 03 appeared first on The Wood Whisperer.

from The Wood Whisperer https://ift.tt/Xe3jvA0
via IFTTT

Handling Your Work Part II

The handle for the dressing table/computer desk came on a spur of the moment. I definitely did not want to buy something in, and I didn’t want to turn them on the lathe, though that is always an option. I saw a couple of strips of offcuts on my benchtop left from the drawer support...

Source

from Paul Sellers' Blog https://ift.tt/bQ81huR
via IFTTT

Handling Your Work Part I

I designed the doorknob below in early January 2009 for a special job I was engaged in, but a friend turner actually turned the six I needed. This one is the original prototype. The woods are ebony and oak and whereas it’s the ebony that’s more dominant and distinctive, it’s the oak that sets it...

Source

from Paul Sellers' Blog https://ift.tt/2DJEWri
via IFTTT

Cross-tie Combination Joints

This is my dovetailed housing dado. I think you will like trying it out. Another joint emerges from a maker who’s conscious of loss in handwork to his craft. In the moment, he decides on a new-ish joint. It’s an off-the-cuff decision made in seconds intended to last a lifetime, and takes a perhaps less...

Source

from Paul Sellers' Blog https://ift.tt/szEiTSy
via IFTTT

Making and Making Steps…

… The Hidden Gems of pure joy in creating your own hand-cut joinery can seem all the more lost in the modernity of today’s methodology surrounding joint making and joinery, but when the hands cut and shape every part using the maker’s energy, something changes forever in him and her. There is no going back....

Source

from Paul Sellers' Blog https://ift.tt/zEhm2Fl
via IFTTT

Election Memory

In thinking about a new USA President about to come, I was reminded of a Craft Fair on the weekend of Thanksgiving in 2008 where I sat with a man, a friend, who I had known for eighteen years. We were having a nice chat when a message came to me that mentioned the possibility...

Source

from Paul Sellers' Blog https://ift.tt/M7b945k
via IFTTT