Monday, February 12, 2024

Top Construction & Oil Finish | The Big Finish | Sideboard Pt 11

As the Sideboard Series comes to a close, we’ll embark on the Top Construction & Oil Finish. The top is really just a large walnut panel. I like to use Dominos to help keep the panels aligned curing the glueup though the same thing could be achieved by using several sets of cauls. The idea is to keep the boards as even as possible so that it limits the amount of work we need to do after the glue dries. After the top is fully scraped and sanded, I added a small 1/8″ roundover. If you’re looking for more information and tips for making wide panels that stay flat, check out this video. 

The finish I used is Bumblechutes, a natural tung oil finish thinned with citrus solvent. You can save 10% using the code TWW10 at Bumblechutes.com This finish is not the most protective in the world, but it does just fine on a piece of furniture that doesn’t require a ton of protection.

The top is attached to the case using screws and elongated screws. 1 1/4″ should do the trick as long as you don’t drive them too deep. The back panel is then added with glue and brad nails.

If you enjoyed this series, please let us know in the comments. This kind of content just doesn’t do well on YouTube these days but for a business like ours, the view numbers only tell part of the story. So give us some feedback and in the meantime, check out The Wood Whisperer Guild for more high quality detailed courses from some of the best instructors in the industry.

Looking for the Summary version of this build? Click here!

Stuff I Used:

Download the FREE Plans:

The post Top Construction & Oil Finish | The Big Finish | Sideboard Pt 11 appeared first on The Wood Whisperer.



from The Wood Whisperer https://ift.tt/skb5hq1
via IFTTT